# Automatic selector indicator panel screws (NB1)

Canonical URL: https://miatatorque.com/spec/at-selector-indicator-panel-screws-nb1/

Applicability: NB 1999–2000 (BP-4W, 4AT) — 2000 applicability inferred from 1999 factory evidence within the owner-approved NB1 group.

Confidence: fsm

18–26 in·lb / 2–2.9 N·m

Always confirm against your factory manual. Match every restriction and follow all stages and procedure notes. Disputed claims must not be automatically resolved. The complete record below preserves every printed unit, source claim and procedure.

```json
{
  "id": "at-selector-indicator-panel-screws-nb1",
  "name": "Automatic selector indicator panel screws (NB1)",
  "aliases": [],
  "applies_to": [
    {
      "gen": "NB",
      "years": [
        1999,
        2000
      ],
      "engines": [
        "BP-4W"
      ],
      "trans": [
        "4AT"
      ],
      "note": "2000 applicability inferred from 1999 factory evidence within the owner-approved NB1 group."
    }
  ],
  "kind": "torque",
  "torque": {
    "nm": [
      2,
      2.9
    ],
    "kgfcm": [
      20,
      30
    ],
    "inlb": [
      18,
      26
    ]
  },
  "procedure": {
    "notes": "Shift selector to P. Align the slider alignment hole with the indicator-panel hole and hold it with suitable heavy-gauge wire. Use factory figure order: viewed from above as in the selector illustration, right upper, right lower, left upper, left lower. These positions refer to the illustration orientation, not vehicle left/right. Remove the wire, verify selector/indicator alignment in every range, and verify the emergency override button operates correctly."
  },
  "confidence": "fsm",
  "sources": [
    {
      "source": "fsm-1999",
      "page": "05–14–3; 05–14–5; 05–14–6",
      "as_printed": "2.0–2.9 N·m {20–30 kgf·cm, 18–26 in·lbf}",
      "verified_years": [
        1999,
        1999
      ],
      "torque": {
        "nm": [
          2,
          2.9
        ],
        "kgfcm": [
          20,
          30
        ],
        "inlb": [
          18,
          26
        ]
      },
      "document": {
        "id": "fsm-1999",
        "tier": 1,
        "title": "1999 Mazda MX-5 Miata Workshop Manual",
        "covers": [
          {
            "gen": "NB",
            "years": [
              1999,
              2000
            ],
            "engines": [
              "BP-4W"
            ]
          }
        ],
        "url": "https://www.mellens.net/mazda/Mazda-Miata-1999-2001.pdf"
      }
    }
  ],
  "jobs": [],
  "system": "transmission",
  "component": "reaudit-1999",
  "componentName": "Additional NB1 automatic service fasteners",
  "sequence_diagrams": [],
  "url": "https://miatatorque.com/spec/at-selector-indicator-panel-screws-nb1/"
}
```