ABS bracket small mounting nut (NB2)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture); later manuals may differ.
≈61–87 in·lbin·lb6.9–9.8 N·m6.9–9.8 N·m≈61–87 in·lb
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
The diagram prints 43–43 in·lbf, inconsistent with both metric ranges. Retain the quotation but omit this imperial range from structured torque. Inconsistent printed unit(s) omitted from structured torque: inlb. Use printed N·m; inconsistent secondary units do not change the factory N·m value.
Applies to
- NB 2001–2005 (BP-Z3, ABS)
- NB 2004–2005 (BP-Z3-TURBO, ABS)
- Verified in: 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)
Sources
- 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1Page PDF p. 1330≈61–87 in·lb (6.9–9.8 N·m)Printed: “6.9—9.8 {70—100, 43—43} N·m {kgf·cm, in·lbf}”Printed N·m is authoritative per owner instruction. Secondary-unit misprints are preserved in as_printed but omitted from structured torque.
Also in ABS
- Front wheel-speed sensor bolt
- Rear wheel-speed sensor and bracket bolts
- ABS hydraulic unit bracket bolts and nuts
- ABS hydraulic unit bolt and harness clip
- ABS hydraulic unit connector bolt
- ABS hydraulic unit studs
- ABS control module nuts and bolt
- Front ABS wheel speed sensor mounting bolt (NB2)
- Rear ABS wheel speed sensor mounting bolt (NB2)
- Rear ABS wheel speed sensor bracket bolt (NB2)
- ABS hydraulic unit to bracket nuts (NB2)
- ABS bracket upper mounting bolts (NB2)
- ABS bracket lower mounting nut (NB2)
- ABS hydraulic unit brake pipe flare nuts (NB2)
- Front ABS sensor harness bracket small bolt (NB2)
- Front ABS sensor harness bracket large bolt (NB2)