Updated specs are available.
P/S, A/C, P/S+A/C belt deflection — new (NB1)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1999 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
8.0—9.0 {0.32—0.35} mm {in}8.0—9.0 {0.32—0.35} mm {in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Check engine cold or at least 30 min after stopping. New means used on a running engine for less than five minutes. Apply 98 N {10 kgf, 22 lbf} midway between the specified pulleys. Deflection limit is a maximum.
Applies to
- NB 1999–2000 (BP-4W) — Other years inferred from 1999 factory evidence.
- Verified in: 1999 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
Page 01–10–1 (PDF p. 196) · Printed value & notes
Page 01–10–1 (PDF p. 196)Printed: “Deflection mm {in} P/S, A/C, P/S+A/C *New 8.0—9.0 {0.32—0.35}”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)