Brake master cylinder stop screw (1999, without ABS)
This spec doesn't apply to the car you selected.
18–22 in·lb in·lb2–2.5 N·m2–2.5 N·m18–22 in·lb in·lb
Single sourceOnly one non-factory source so far. Double-check before relying on it.
Applies to
- NB 1999 (non-ABS)
Sources
- Page PDF p. 1518–22 in·lb (2–2.5 N·m)Printed: “INCH Lbs. (N.m) Master Cylinder Stop Screw & "O" Ring (Non ABS) 18-22 (2-2.5)”Claim for the 1999 Miata printout; does not extend this spec's applicability.
Also in Brake lines & master cylinder
- Brake pipe flare nuts
- Master cylinder connector bolt
- Proportioning bypass valve bracket nut
- Proportioning bypass valve bolt
- Brake booster (power brake unit) mounting nuts
- Rear brake pipe joint mounting bolt (NB2)
- Rear brake pipe flare nuts (NB2)
- Front brake pipe to flexible hose flare nut (NB2)
- Brake master cylinder mounting nuts (NB2)
- Brake master cylinder pipe flare nuts (NB2)
- Brake booster (power brake unit) mounting nuts (NB2)
- Brake master cylinder reservoir screw (NB2)
- Brake master cylinder stop screw (NB2)
- Brake master cylinder stop pin (NB2)
- Proportioning bypass valve bolts (non-ABS) (NB2)
- Brake pipe joint bolts (ABS) (NB2)
- Brake bleeder screw (NB2)
- Brake master cylinder mounting nut and washer (1999)
- Brake master cylinder reservoir screw (1999)
- Brake master cylinder stop screw (1999, ABS)