Updated specs are available.
Camshaft journal diameter (Mazdaspeed)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turbo; later manuals may differ.
Standard diameter 1.0213—1.0222 in (25.940—25.965 mm) Minimum diameter 1.0201 in (25.910 mm)Standard diameter 25.940—25.965 mm {1.0213—1.0222 in} Minimum diameter 25.910 mm {1.0201 in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measure X and Y at both specified axial positions.
Applies to
- NB 2004–2005 (BP-Z3-TURBO) — 2004 factory turbo-engine evidence; 2005 inferred within MSM family.
- Verified in: 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turbo
Sources (1)
View 1 source citations
- 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turboTier 1
Page 01–10–21 (PDF p. 33) · Printed value & notes
Part no. 9999-95-EWBP-04Page 01–10–21 (PDF p. 33)Printed: “Standard diameter 25.940—25.965 mm {1.0213—1.0222 in} Minimum diameter 25.910 mm {1.0201 in}”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)