Updated specs are available.
Camshaft lobe height — standard and minimum (NA6)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1990 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
Height Standard IN: 1.6098 in (40.888 mm) EX: 1.6098 in (40.889 mm) Minimum IN: 1.6019 in (40.688 mm) EX: 1.6019 in (40.689 mm)Height Standard IN: 40.888 mm (1.6098 in) EX: 40.889 mm (1.6098 in) Minimum IN: 40.688 mm (1.6019 in) EX: 40.689 mm (1.6019 in)
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measure each cam lobe at the factory-indicated two points; keep intake and exhaust values separate.
Applies to
- NA 1990–1993 (B6) — Other years inferred from 1990 factory evidence.
- Verified in: 1990 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
Page B–52 (PDF p. 79) · Printed value & notes
Part no. 1193-10-89CPage B–52 (PDF p. 79)Printed: “Height Standard IN: 40.888mm (1.6098 in) EX: 40.889mm (1.6098 in) Minimum IN: 40.688mm (1.6019 in) EX: 40.689mm (1.6019 in)”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)