Updated specs are available.
Connecting rod bending (NA8)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1994 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
Bending: 0.0012 in (0.030 mm) max./3.94 in (100 mm)Bending: 0.030mm {0.0012 in} max./100mm {3.94 in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Repair or replace if excessive. When replacing rod, also replace matching cap, bolts and nuts as a matched set.
Applies to
- NA 1994–1997 (BP) — Other years inferred from 1994 factory evidence.
- Verified in: 1994 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
- 1994 Mazda MX-5 Miata Workshop ManualTier 1
Page B–56 (PDF p. 93) · Printed value & notes
Page B–56 (PDF p. 93)Printed: “Bending: 0.030mm {0.0012 in} max./100mm {3.94 in}”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)