Updated specs are available.
Crankshaft end play (Mazdaspeed)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turbo; later manuals may differ.
Standard end play 0.0032—0.0111 in (0.080—0.282 mm) Maximum end play 0.012 in (0.30 mm)Standard end play 0.080—0.282 mm {0.0032—0.0111 in} Maximum end play 0.30 mm {0.012 in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measure with main bearing caps installed per assembly procedure; correct with the specified thrust bearing/crankshaft procedure.
Applies to
- NB 2004–2005 (BP-Z3-TURBO) — 2004 factory turbo-engine evidence; 2005 inferred within MSM family.
- Verified in: 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turbo
Sources (1)
View 1 source citations
- 2004 Mazda Engine Workshop Manual BP (1.8L), normally aspirated and turboTier 1
Page 01–10–25 (PDF p. 37) · Printed value & notes
Part no. 9999-95-EWBP-04Page 01–10–25 (PDF p. 37)Printed: “Standard end play 0.080—0.282 mm {0.0032—0.0111 in} Maximum end play 0.30 mm {0.012 in}”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)