Differential drive pinion locknut (1997)
This spec doesn't apply to the car you selected.
94–209 ft·lb128–284 N·m128–284 N·m94–209 ft·lb
Single sourceOnly one non-factory source so far. Double-check before relying on it.
Procedure
Overhaul fastener; setting pinion bearing preload is required. Do not treat this as a stand-alone replacement torque. See the cited differential overhaul procedure.
Applies to
- NA 1997 (BP)
Sources
- Page PDF p. 2294–209 ft·lb (128–284 N·m)Printed: “Drive Pinion Lock Nut 94-209 (128-284)”Claim for the 1997 Miata printout; does not extend this spec's applicability.
Also in Differential
- Differential fill plug
- Differential drain plug
- Differential rear mount bolts
- Ring gear bolts
- Differential bearing cap bolts
- Differential bearing cap lock plate bolts
- Ring gear bolts (1990–93)
- Differential drain plug (NB2)
- Differential fill plug (NB2)
- Differential ring gear bolts (NB2)
- Differential mounting nuts (NB2)
- Differential breather (NB2)
- Differential baffle bolts (NB2)
- Differential case to carrier bolts (NB2)
- Differential bearing cap bolts (NB2)
- Differential bearing adjuster lock plate bolts (NB2)
- Differential pinion companion flange locknut (NB2)
- Differential pinion bearing preload (NB2)
- Differential carrier to housing bolts
- Differential to chassis outer mounting nuts
- Differential drive pinion locknut (1994)
- Differential bearing cap bolts (NA 1.8L)
- Differential bearing cap lock plate bolts (NA 1.8L)
- Ring gear bolts (NA 1.8L)