Updated specs are available.
Cylinder compression — standard (NA8)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1994 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
1,182 psi (255 kPa; 12.8 kgf/cm²) at 300 rpm1,255 kPa {12.8 kgf/cm², 182 psi} at 300 rpm
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Fully charged battery; warm engine to normal operating temperature, then turn off. Remove all spark plugs, disconnect ignition-coil connector, connect compression gauge and crank with accelerator fully depressed. Record maximum reading at 300 rpm for each cylinder.
Applies to
- NA 1994–1997 (BP) — Other years inferred from 1994 factory evidence.
- Verified in: 1994 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
- 1994 Mazda MX-5 Miata Workshop ManualTier 1
Page B–10 (PDF p. 47) · Printed value & notes
Page B–10 (PDF p. 47)Printed: “Compression: 1,255 kPa {12.8 kgf/cm², 182 psi}–300 rpm”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)