Updated specs are available.
Front lower control arm alignment cam nuts (1992)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1992 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
69–83 ft·lb93–113 N·m93–113 N·m69–83 ft·lb
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Tighten the alignment cam nuts to 93–113 N·m after adjustment. The R–15 diagram also labels the cam nuts 93–113; its 73–93 callouts belong to the shock and lower ball joint attachments. Fastener mapping confirmed by the owner. Tighten suspension pivot fasteners with the vehicle lowered and unladen, following the installation instruction on R–15.
Applies to
- NA 1992 (B6)
- Verified in: 1992 Mazda MX-5 Miata Workshop Manual
Sources
- 1992 Mazda MX-5 Miata Workshop ManualTier 1Part no. 1271-10-91G (9999-95-0428-92)Page R–8 (PDF p. 712)69–83 ft·lb (93–113 N·m)Printed: “93–113 N·m (9.5–11.5 m-kg, 69–83 ft-lb)”
- 1992 Mazda MX-5 Miata Workshop ManualTier 1Part no. 1271-10-91G (9999-95-0428-92)Page R–15 (PDF p. 719)69–83 ft·lb (93–113 N·m)Printed: “93–113 (9.5–11.5, 69–83) N·m (m-kg, ft-lb)”
Used in jobs
Also in Front control arms
- Front upper ball joint nut (to knuckle)
- Front lower arm alignment cam bolt nuts
- Front lower arm alignment cam bolt nuts (1994 on)
- Front lower ball joint nut
- Front lower arm rear cam bolt nut (1994–97)
- Front upper arm pivot bolt nut
- Front lower ball joint to lower arm bolts and nuts
- Front lower arm alignment cam nuts (NB2)
- Front upper arm pivot nut (NB2)
- Front upper ball joint nut (NB2)
- Front lower ball joint to arm vertical bolt (NB2)
- Front lower ball joint to arm nut (NB2)
- Front lower ball joint to knuckle nut (NB2)
- Front upper ball joint rotation torque (NB2)
- Front lower ball joint rotation torque (NB2)