Front upper ball joint rotation torque (NB2)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture); later manuals may differ.
0.3—2.2 N·m {2.8—23.4 kgf·cm, 2.5—20.3 in·lbf}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measured rotational resistance; use the inspection conditions on the cited page. This is not a fastener tightening torque.
Applies to
- NB 2001–2005 (BP-Z3)
- NB 2004–2005 (BP-Z3-TURBO)
- Verified in: 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)
Sources
- 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1Page PDF p. 1090Printed: “0.3—2.2 N·m {2.8—23.4 kgf·cm, 2.5—20.3 in·lbf}”
Also in Front control arms
- Front upper ball joint nut (to knuckle)
- Front lower arm alignment cam bolt nuts
- Front lower arm alignment cam bolt nuts (1994 on)
- Front lower ball joint nut
- Front lower arm rear cam bolt nut (1994–97)
- Front upper arm pivot bolt nut
- Front lower ball joint to lower arm bolts and nuts
- Front lower arm alignment cam nuts (NB2)
- Front upper arm pivot nut (NB2)
- Front upper ball joint nut (NB2)
- Front lower ball joint to arm vertical bolt (NB2)
- Front lower ball joint to arm nut (NB2)
- Front lower ball joint to knuckle nut (NB2)
- Front lower ball joint rotation torque (NB2)