Updated specs are available.
Alternator belt deflection — used (NA8)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1994 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
6.0—7.5 {0.24—0.29} mm {in}6.0—7.5 {0.24—0.29} mm {in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Check engine cold or at least 30 min after stopping. New means used on a running engine for less than five minutes. Apply 98 N {10 kgf, 22 lbf} midway between the specified pulleys. Deflection limit is a maximum.
Applies to
- NA 1994–1997 (BP) — Other years inferred from 1994 factory evidence.
- Verified in: 1994 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
- 1994 Mazda MX-5 Miata Workshop ManualTier 1
Page B–6 (PDF p. 43) · Printed value & notes
Page B–6 (PDF p. 43)Printed: “Deflection mm {in} Alternator Used 6.0—7.5 {0.24—0.29}”
Related service specs
- Accessory drive belt deflection — new belt (NA6)
- Accessory drive belt tension — new belt (NA6)
- Accessory drive belt deflection — used belt (NA6)
- Accessory drive belt tension — used belt (NA6)
- Compression pressure — standard (NA6)
- Compression pressure — minimum (NA6)
- Compression pressure — maximum cylinder difference (NA6)
- Cylinder head gasket face distortion — maximum (NA6)