Updated specs are available.
Rear brake disc thickness — minimum (NA6)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1990 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
Minimum: 0.28 in (7.0 mm)Minimum: 7.0 mm (0.28 in)
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Minimum service thickness for original NA6 brake hardware; does not apply to a later brake conversion and is not an after-machining specification.
Applies to
- NA 1990–1993 (B6) — Other years inferred from 1990 factory evidence.
- Verified in: 1990 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
Page P–24 (PDF p. 471) · Printed value & notes
Part no. 1193-10-89CPage P–24 (PDF p. 471)Printed: “Minimum: 7.0mm (0.28 in)”
Related service specs
- Front brake pad remaining lining — minimum (NA6)
- Front brake disc runout — maximum (NA6)
- Front brake disc thickness — minimum (NA6)
- Rear brake pad remaining lining — minimum (NA6)
- Rear brake disc runout — maximum (NA6)
- Brake pedal free play (NA6)
- Brake pedal to floor clearance (NA6)
- Parking brake lever stroke (NA6)