Updated specs are available.
Rear wheel bearing maximum axial play (NB2 and Mazdaspeed)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2003 Mazda MX-5 Miata Workshop Manual (electronic manual capture); 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture); later manuals may differ.
Maximum 0.002 in (0.05 mm)Maximum 0.05 mm {0.002 in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Remove wheel, brake caliper component and disc plate. Position a dial indicator against the hub; push and pull the hub axially by hand. If excessive, replace and tighten the locknut to its specified torque and retest; replace the wheel hub component as necessary.
Applies to
- NB 2001–2005 (BP-Z3) — Other years inferred from 2003/2005 factory evidence.
- NB 2004–2005 (BP-Z3-TURBO) — 2005 factory evidence; 2004 inferred within MSM family.
- Verified in: 2003 Mazda MX-5 Miata Workshop Manual (electronic manual capture); 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)
Sources (2)
View 2 source citations
- 2003 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1
Page PDF p. 995 · Printed value & notes
Page PDF p. 995Printed: “Maximum wheel bearing play 0.05 mm {0.002 in}” - 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1
Page Wheel Hub, Knuckle Pre-Inspection (PDF p. 1141) · Printed value & notes
Page Wheel Hub, Knuckle Pre-Inspection (PDF p. 1141)Printed: “Maximum wheel bearing play 0.05 mm {0.002 in}”
Related service specs
- Rear wheel alignment — total toe-in (NB2, non-turbo)
- Rear wheel alignment — camber by ride height (NB2, non-turbo)
- Rear wheel alignment — thrust angle (NB2, non-turbo)
- Rear alignment total toe-in (NA8)
- Rear alignment toe-in per side (NA8)
- Rear alignment camber by rear ride height (NA8)
- Rear wheel alignment — total toe-in (NB1)
- Rear wheel alignment — camber by ride height (NB1)