Steering wheel effort (NB2)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture); later manuals may differ.
7.8 N·m {80 kgf·cm, 69 in·lbf} max.
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measured rotational resistance; use the inspection conditions on the cited page. This is not a fastener tightening torque.
Applies to
- NB 2001–2005 (BP-Z3)
- NB 2004–2005 (BP-Z3-TURBO)
- Verified in: 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)
Sources
- 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1Page PDF p. 1665Printed: “7.8 N·m {80 kgf·cm, 69 in·lbf} max.”
Also in Steering rack
- Steering rack mounting bracket bolts (1994–97)
- Steering rack mounting bracket bolts (NB)
- Manual rack adjusting cover locknut
- Manual rack rear cover locknut
- Power rack adjusting cover locknut (1994–97)
- Power rack adjusting cover locknut (NB)
- Steering gear mounting bracket bolts (manual steering, 1990–93)
- Steering rack preload adjusting locknut (NB2)
- Steering rack mounting bracket bolts (NB2)
- Steering rack mounting through bolts (NB2)
- Steering rack hydraulic pipe unions (NB2)
- Steering pinion housing socket bolts (NB2)
- Steering rack seal holder (NB2)
- Steering rack preload adjusting cover (NB2)
- Steering rack pinion preload at center (NB2)