EGR pipe mounting bolts (NB2)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture); later manuals may differ.
≈70–95 in·lbin·lb7.9–10.7 N·m7.9–10.7 N·m≈70–95 in·lb
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Inconsistent printed unit(s) omitted from structured torque: kgfm. Use printed N·m; inconsistent secondary units do not change the factory N·m value.
Applies to
- NB 2001–2005 (BP-Z3)
- Verified in: 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)
Sources
- 2005 Mazda MX-5 Miata Workshop Manual (electronic manual capture)Tier 1Page PDF p. 854≈70–95 in·lb (7.9–10.7 N·m)Printed: “7.9—10.7 {80—110, 69.5—95.4} N·m {kgf·cm, in·lbf}”Printed N·m is authoritative per owner instruction. Secondary-unit misprints are preserved in as_printed but omitted from structured torque.
Also in Emissions (EGR)
- EGR valve bolts
- EGR pipe flare nut
- EGR pipe union at intake manifold (NB2)
- Mazdaspeed EGR pipe union at exhaust manifold (NB2)
- Mazdaspeed EGR pipe mounting bolts (NB2)
- EVAP leak detection pump mounting screws (NB2)
- EVAP air filter mounting nut (NB2)
- Purge solenoid valve mounting nut (NB2)
- EGR valve mounting bolts (NB2)
- EGR pipe union at exhaust manifold (NB2)
- EVAP leak detection pump bracket nuts (NB2)
- EVAP air hose bracket bolt (NB2)