Updated specs are available.
Front upper control arm pivot nut (NA6)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1990 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
75–102 ft·lb102–138 N·m102–138 N·m75–102 ft·lb
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Loosely tighten upper arm and shock absorber bolts, lower vehicle, then tighten with vehicle unladen. Adjust front wheel alignment.
Applies to
- NA 1990–1993 (B6) — 1991–1993 applicability inferred from 1990 factory evidence within the owner-approved NA6 group.
- Verified in: 1990 Mazda MX-5 Miata Workshop Manual
Sources
- Part no. 1193-10-89CPage R–17 (PDF p. 498)75–102 ft·lb (102–138 N·m)Printed: “102—138 (10.4—14.0, 75—102) N·m (m-kg, ft-lb)”
Also in Additional NA6 factory specifications
- Brake master cylinder mounting nuts (NA6)
- Proportioning bypass valve bolt (NA6)
- Cooling fan blade nut (NA6)
- Rear main seal cover bolts (NA6)
- Alternator bracket bolts (NA6)
- Starter bracket bolt (NA6)
- Alternator B terminal nut (NA6)
- Power steering pump bolt A (NA6)
- Power steering pump nut B (NA6)
- 5MT blind cover bolts (NA6)
- 5MT bearing housing cover bolt (NA6)