Updated specs are available.
Power steering pump nut B (NA6)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1990 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
27–40 ft·lb36–54 N·m36–54 N·m27–40 ft·lb
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
B–6 identifies nut B at the lower pump mounting point. Adjust belt tension before final tightening; nut C has a separate value.
Applies to
- NA 1990–1993 (B6) — 1991–1993 applicability inferred from 1990 factory evidence within the owner-approved NA6 group.
- Verified in: 1990 Mazda MX-5 Miata Workshop Manual
Sources
- Part no. 1193-10-89CPage B–6 (PDF p. 33)27–40 ft·lb (36–54 N·m)Printed: “36—54 N·m (3.7—5.5 m-kg, 27—40 ft-lb)”
Also in Additional NA6 factory specifications
- Brake master cylinder mounting nuts (NA6)
- Proportioning bypass valve bolt (NA6)
- Cooling fan blade nut (NA6)
- Rear main seal cover bolts (NA6)
- Alternator bracket bolts (NA6)
- Starter bracket bolt (NA6)
- Alternator B terminal nut (NA6)
- Power steering pump bolt A (NA6)
- Front upper control arm pivot nut (NA6)
- 5MT blind cover bolts (NA6)
- 5MT bearing housing cover bolt (NA6)