Updated specs are available.
Mainshaft-to-gear/bush maximum clearance (NA8 5MT)
This spec doesn't apply to the car you selected.
Not yet checked against the factory manual for your car's year. It's verified in the 1994 Mazda MX-5 Miata Workshop Manual; later manuals may differ.
Maximum 0.006 in (0.15 mm)Maximum 0.15 mm {0.006 in}
Factory manualTaken from a Mazda factory workshop manual, with page citation.
Procedure
Measure clearance between the mainshaft and gear or bush during disassembled transmission inspection. This is the inspection limit, not an assembly end-play setting.
Applies to
- NA 1994–1997 (BP, 5MT) — 1995–1997 inferred from 1994 factory evidence; actual-year verification is separate.
- Verified in: 1994 Mazda MX-5 Miata Workshop Manual
Sources (1)
View 1 source citations
- 1994 Mazda MX-5 Miata Workshop ManualTier 1
Page J–23 (PDF p. 377) · Printed value & notes
Page J–23 (PDF p. 377)Printed: “Maximum clearance: 0.15mm {0.006 in}”
Related service specs
- Drive gear thrust clearances (Y16M-D 6MT)
- Drive gear radial clearances (Y16M-D 6MT)
- Reverse idler gear to shaft radial clearance (Y16M-D 6MT)
- Synchronizer ring to gear flank clearances (Y16M-D 6MT)
- Mainshaft runout — maximum (Y16M-D 6MT)
- Countershaft runout — maximum (Y16M-D 6MT)
- Shift fork to clutch hub sleeve clearance (Y16M-D 6MT)
- 4th gear inner race to thrust washer selection clearance (Y16M-D 6MT)